| Louise Goodchild Designs |
|
Tree Pendant with Leaves and Flowers TUTORIAL
£
6.00
This is a 2.27mb PDF tutorial with full colour instructions to make one of my leafy, beaded wire wrapped tree pendants as shown in the picture.
The 17-page tutorial has 24 steps clearly laid out, with 30 full-colour accompanying photographs, detailing how to make a pendant from start to finish.
Please note this is for the instructions to make the pendant only, not the materials you will need, which are as follows:
0.71mm or 0.8mm green craft wire
0.315mm brown or gun metal craft wire
0.315mm green craft wire
Size 11 seed beads in 3 colours (I have used green, lilac and yellow)
Once you have purchased the tutorial, the PDF will be sent to you in an email. You will need Adobe Reader to view this, which can be downloaded free at www.adobe.com. Please advise me of the email address you would like me to send the file to, otherwise I will use your PayPal address. Please allow a few hours for your tutorial to arrive, as I do not have access to my email 24 hours a day, and we may live in different time zones! :)
This tutorial may not be copied, sold or distributed and is for your personal use only. You may sell items made using these instructions providing it is on an individual handmade basis (no wholesale or mass production), and that full credit is given to me for the design. Please do feel free to send me pictures of anything you make using it, as I love to see other people's work! :)
The 17-page tutorial has 24 steps clearly laid out, with 30 full-colour accompanying photographs, detailing how to make a pendant from start to finish.
Please note this is for the instructions to make the pendant only, not the materials you will need, which are as follows:
0.71mm or 0.8mm green craft wire
0.315mm brown or gun metal craft wire
0.315mm green craft wire
Size 11 seed beads in 3 colours (I have used green, lilac and yellow)
Once you have purchased the tutorial, the PDF will be sent to you in an email. You will need Adobe Reader to view this, which can be downloaded free at www.adobe.com. Please advise me of the email address you would like me to send the file to, otherwise I will use your PayPal address. Please allow a few hours for your tutorial to arrive, as I do not have access to my email 24 hours a day, and we may live in different time zones! :)
This tutorial may not be copied, sold or distributed and is for your personal use only. You may sell items made using these instructions providing it is on an individual handmade basis (no wholesale or mass production), and that full credit is given to me for the design. Please do feel free to send me pictures of anything you make using it, as I love to see other people's work! :)
Flowers in the Window TUTORIAL
£
6.00
This is a listing for a PDF tutorial with full colour instructions to make a beaded wire wrapped pendant of a vase of flowers in a window as shown in the picture.
The 15-page tutorial has 39 steps clearly laid out, with 39 full-colour accompanying photographs, detailing how to make a pendant from start to finish.
Please note this listing is for the instructions to make the pendant only, not the materials you will need, which are as follows:
40cm approx. 0.71mm (21 gauge) or 0.8mm (20 gauge) brown wire
10cm approx. 0.71mm (21 gauge) or 0.8mm (20 gauge) black wire
4m approx. 0.315mm (28 gauge) brown wire
2m approx. 0.315mm (28 gauge) green wire
2m approx. 0.315mm (28 gauge) black wire
Size 11 seed beads in 3 colours (I have used black, red and brown)
You have a choice of file sizes - the 'low' resolution file is 1.26MB, and the 'high' resolution file is 7.39MB. Both are perfectly possible to follow, but the higher resolution file has clearer pictures, which are better for printing - however, this may take longer to download. *Please specify when ordering which file size you require*.
Once you have purchased the tutorial, the PDF will be sent to you in an email. You will need Adobe Reader to view this, which can be downloaded free at www.adobe.com. Please advise me of the email address you would like me to send the file to, otherwise I will use your PayPal address. Please allow a few hours for your tutorial to arrive, as I do not have access to my email 24 hours a day, and we may live in different time zones! :)
This tutorial may not be copied, sold or distributed and is for your personal use only. You may sell items made using these instructions providing it is on an individual handmade basis (no wholesale or mass production), and that full credit is given to me for the design. Please do feel free to send me pictures of anything you make using it, as I love to see other people's work! :)
The 15-page tutorial has 39 steps clearly laid out, with 39 full-colour accompanying photographs, detailing how to make a pendant from start to finish.
Please note this listing is for the instructions to make the pendant only, not the materials you will need, which are as follows:
40cm approx. 0.71mm (21 gauge) or 0.8mm (20 gauge) brown wire
10cm approx. 0.71mm (21 gauge) or 0.8mm (20 gauge) black wire
4m approx. 0.315mm (28 gauge) brown wire
2m approx. 0.315mm (28 gauge) green wire
2m approx. 0.315mm (28 gauge) black wire
Size 11 seed beads in 3 colours (I have used black, red and brown)
You have a choice of file sizes - the 'low' resolution file is 1.26MB, and the 'high' resolution file is 7.39MB. Both are perfectly possible to follow, but the higher resolution file has clearer pictures, which are better for printing - however, this may take longer to download. *Please specify when ordering which file size you require*.
Once you have purchased the tutorial, the PDF will be sent to you in an email. You will need Adobe Reader to view this, which can be downloaded free at www.adobe.com. Please advise me of the email address you would like me to send the file to, otherwise I will use your PayPal address. Please allow a few hours for your tutorial to arrive, as I do not have access to my email 24 hours a day, and we may live in different time zones! :)
This tutorial may not be copied, sold or distributed and is for your personal use only. You may sell items made using these instructions providing it is on an individual handmade basis (no wholesale or mass production), and that full credit is given to me for the design. Please do feel free to send me pictures of anything you make using it, as I love to see other people's work! :)
Winter Tree TUTORIAL
£
6.00
This is a listing for a 6MB PDF tutorial with full colour instructions to make one of my wire wrapped wrapped winter tree pendants as shown in the picture.
The 12 page tutorial has 29 steps clearly laid out, with 31 full-colour accompanying photographs, detailing how to make a pendant from start to finish.
Please note this listing is for the instructions to make the pendant only, not the materials you will need, which are as follows:
30cm approx. 0.71mm (21 gauge) or 0.8mm (20 gauge) ice blue craft wire
1m approx. 0.315mm (28 gauge) ice blue craft wire
4.5m approx. 0.315mm (28 gauge) brown or gun metal craft wire
Size 11 seed beads in white
Size 11 seed beads in iridescent clear
Size 11 seed beads in iridescent transparent blue
Size 15 seed beads in white
Size 15 seed beads in iridescent clear
Once you have purchased the tutorial, the PDF will be sent to you in an email. You will need Adobe Reader to view this, which can be downloaded free at www.adobe.com. Please advise me of the email address you would like me to send the file to, otherwise I will use your PayPal address. Please allow a few hours for your tutorial to arrive, as I do not have access to my email 24 hours a day, and we may live in different time zones! :)
This tutorial may not be copied, sold or distributed and is for your personal use only. You may sell items made using these instructions providing it is on an individual handmade basis (no wholesale or mass production), and that full credit is given to me for the design. Please do feel free to send me pictures of anything you make using it, as I love to see other people's work! :)
The 12 page tutorial has 29 steps clearly laid out, with 31 full-colour accompanying photographs, detailing how to make a pendant from start to finish.
Please note this listing is for the instructions to make the pendant only, not the materials you will need, which are as follows:
30cm approx. 0.71mm (21 gauge) or 0.8mm (20 gauge) ice blue craft wire
1m approx. 0.315mm (28 gauge) ice blue craft wire
4.5m approx. 0.315mm (28 gauge) brown or gun metal craft wire
Size 11 seed beads in white
Size 11 seed beads in iridescent clear
Size 11 seed beads in iridescent transparent blue
Size 15 seed beads in white
Size 15 seed beads in iridescent clear
Once you have purchased the tutorial, the PDF will be sent to you in an email. You will need Adobe Reader to view this, which can be downloaded free at www.adobe.com. Please advise me of the email address you would like me to send the file to, otherwise I will use your PayPal address. Please allow a few hours for your tutorial to arrive, as I do not have access to my email 24 hours a day, and we may live in different time zones! :)
This tutorial may not be copied, sold or distributed and is for your personal use only. You may sell items made using these instructions providing it is on an individual handmade basis (no wholesale or mass production), and that full credit is given to me for the design. Please do feel free to send me pictures of anything you make using it, as I love to see other people's work! :)
